Deluxe Adjustable Height Classroom Table
Our Deluxe Adjustable Height Classroom table is heavy duty with an adjustable leg design. The adjustment is a manual spring-loaded pop-pin action that can be twisted and tightened into place to avoid tampering or unauthorized adjustment . The vertical steel tube leg has 14 pre-drilled holes for height selection. The table will adjust to a low seated 24” position up to a full standing 36” position (wheel kits may increase height); this will accommodate K-12 & college level students. The adjustment system is meant for long term height configurations. The adjustment mechanism is a two function system: consisting of spring loaded pull pin and twist tight lock positions that secure the tube in position so the table cannot rock or be accidentally adjusted. This extremely sturdy table has been manufactured for the past 20 years in our Los Angeles, CA factory. These tables can be set up for technical training workstations with one or two users. The table is constructed with a steel frame that is designed with preconfigured holes and mounts that will enable this table to transform into over 30 different configurations or combinations. We also carry an extensive variety of monitor arms for mounting 1- 6 monitors. . Many of the public and private school systems enjoy this table because it can be used as a simple activity classroom table for general studies or can be set up for your most elaborate computer lab environment. One table that does it all !! Call and speak to our Classroom Table Specialist for more details.
Key features :
- Adjustable height 24” - 36” sitting or standing
- 4 monitor capacity
- 1-2 users
- Adjustable CPU positions
- Modesty panel (steel)
- Lower cable management tray
- Advanced adjustment pin system, spring loaded pop pin
- Lower modesty and support panel for maximum strength
- Classroom activity table or computer lab furniture setup
- BIFMA rated
- Made in the USA
- LifeTime Warranty / Free Parts Program
Product Construction:
- Origin of Manufacturing : Versa Products USA Made in Los Angeles, California
- Frame Construction: Heavy duty 14 & 16 gauge recycled carbon steel tubing
- Paint & Finish: Dupont heavy duty powder coat, baked on scratch resistant enamel @ 425 degrees (100 colors available)
- Surface Material: Cleanable Wilsonart commercial grade horizontal laminate (300 custom colors available)
- Board Material: High density .75 - 1” thick recycled MDF wood board with phenolic backer and non toxic bonding agents
- Edging & Adhesives: Recycled simi flexible plastic T Moulding bumper edging & Water based non VOC adhesives
- Casters & Feet Extra heavy duty ½” bolt size slider feet with (1000 lb capacity ) Extra large heavy duty casters with large ½” threaded stem (600 lb each capacity each wheel)
- Welding: Hand welded at all structural connections, full mig welds ¼” continuous beads
- Hardware: Grade five zinc coated fasteners ⅜” , ½”, ¼” bolts / nylon insert nuts
- Packaging: 100% recycled cardboard materials 200-275 lb double wall boxes / custom wood pallets
- MSDS (Material Safety Data Sheets) copies available upon request for all materials listed.
